Refactor spec tests

README.md

@@ -27,9 +27,11 @@ only), 1.9.3, 2.0.0 and 2.1.0.
  * EL 5
  * EL 6
  * EL 7
+ * SLES 10
  * SLES 11
  * SLES 12
  * Ubuntu 12.04 LTS
+ * Ubuntu 14.04 LTS
  * Solaris 9
  * Solaris 10
  * Solaris 11

metadata.json

@@ -67,6 +67,7 @@
     {
       "operatingsystem": "SLES",
       "operatingsystemrelease": [
+        "10",
         "11",
         "12"
       ]
@@ -74,6 +75,7 @@
     {
       "operatingsystem": "SLED",
       "operatingsystemrelease": [
+        "10",
         "11",
         "12"
       ]
@@ -81,7 +83,8 @@
     {
       "operatingsystem": "Ubuntu",
       "operatingsystemrelease": [
-        "12.04"
+        "12.04",
+        "14.04"
       ]
     }
   ],

spec/fixtures/ssh_config_debian

@@ -0,0 +1,61 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+   PasswordAuthentication yes
+   PubkeyAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+   IdentityFile ~/.ssh/id_rsa
+   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   HashKnownHosts no
+   HashKnownHosts no
+   GlobalKnownHostsFile /etc/ssh/ssh_known_hosts
+Host *
+#  GSSAPIAuthentication yes
+  GSSAPIAuthentication yes
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.
+  ForwardX11Trusted yes
+  UseRoaming no
+# Send locale-related environment variables
+  SendEnv LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+  SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+  SendEnv LC_IDENTIFICATION LC_ALL

spec/fixtures/ssh_config_rhel

@@ -0,0 +1,61 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+   PasswordAuthentication yes
+   PubkeyAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+   IdentityFile ~/.ssh/id_rsa
+   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   HashKnownHosts no
+   HashKnownHosts no
+   GlobalKnownHostsFile /etc/ssh/ssh_known_hosts
+Host *
+#  GSSAPIAuthentication yes
+  GSSAPIAuthentication yes
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.
+  ForwardX11Trusted yes
+  UseRoaming no
+# Send locale-related environment variables
+  SendEnv LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+  SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+  SendEnv LC_IDENTIFICATION LC_ALL

spec/fixtures/ssh_config_rhel_old

@@ -0,0 +1,60 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+   PasswordAuthentication yes
+   PubkeyAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+   IdentityFile ~/.ssh/id_rsa
+   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   HashKnownHosts no
+   HashKnownHosts no
+   GlobalKnownHostsFile /etc/ssh/ssh_known_hosts
+Host *
+#  GSSAPIAuthentication yes
+  GSSAPIAuthentication yes
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.
+  ForwardX11Trusted yes
+# Send locale-related environment variables
+  SendEnv LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+  SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+  SendEnv LC_IDENTIFICATION LC_ALL

spec/fixtures/ssh_config_solaris

@@ -0,0 +1,54 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+   PasswordAuthentication yes
+   PubkeyAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+   IdentityFile ~/.ssh/id_rsa
+   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   HashKnownHosts no
+   GlobalKnownHostsFile /etc/ssh/ssh_known_hosts
+Host *
+#  GSSAPIAuthentication yes
+  GSSAPIAuthentication yes
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.

spec/fixtures/ssh_config_suse

@@ -0,0 +1,60 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: ssh_config,v 1.21 2005/12/06 22:38:27 reyk Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+   PasswordAuthentication yes
+   PubkeyAuthentication yes
+#   HostbasedAuthentication no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+   IdentityFile ~/.ssh/id_rsa
+   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+   Protocol 2
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
+#   HashKnownHosts no
+   HashKnownHosts no
+   GlobalKnownHostsFile /etc/ssh/ssh_known_hosts
+Host *
+#  GSSAPIAuthentication yes
+  GSSAPIAuthentication yes
+# If this option is set to yes then remote X11 clients will have full access
+# to the original X11 display. As virtually no X11 client supports the untrusted
+# mode correctly we set this to yes.
+  ForwardX11Trusted yes
+# Send locale-related environment variables
+  SendEnv LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+  SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+  SendEnv LC_IDENTIFICATION LC_ALL

spec/fixtures/sshd_config_debian

@@ -0,0 +1,139 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Port 22
+#Protocol 2,1
+Protocol 2
+#AddressFamily any
+AddressFamily any
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_rsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+ServerKeyBits 1024
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTH
+#LogLevel INFO
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 120
+LoginGraceTime 120
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+#GSSAPICleanupCredentials yes
+GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication mechanism.
+# Depending on your PAM configuration, this may bypass the setting of
+# PasswordAuthentication, PermitEmptyPasswords, and
+# "PermitRootLogin without-password". If you just want the PAM account and
+# session checks to run without PAM authentication, then enable this but set
+# ChallengeResponseAuthentication=no
+#UsePAM no
+UsePAM yes
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+#AllowTcpForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+ClientAliveInterval 0
+ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS yes
+UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#MaxSessions 10
+
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+Banner none
+
+#XAuthLocation /usr/bin/xauth
+XAuthLocation /usr/bin/xauth
+
+# override default of no subsystems
+Subsystem sftp /usr/lib/openssh/sftp-server
+

spec/fixtures/sshd_config_rhel

@@ -0,0 +1,139 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Port 22
+#Protocol 2,1
+Protocol 2
+#AddressFamily any
+AddressFamily any
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_rsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+ServerKeyBits 1024
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTH
+#LogLevel INFO
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 120
+LoginGraceTime 120
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+#GSSAPICleanupCredentials yes
+GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication mechanism.
+# Depending on your PAM configuration, this may bypass the setting of
+# PasswordAuthentication, PermitEmptyPasswords, and
+# "PermitRootLogin without-password". If you just want the PAM account and
+# session checks to run without PAM authentication, then enable this but set
+# ChallengeResponseAuthentication=no
+#UsePAM no
+UsePAM yes
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+#AllowTcpForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+ClientAliveInterval 0
+ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS yes
+UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#MaxSessions 10
+
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+Banner none
+
+#XAuthLocation /usr/bin/xauth
+XAuthLocation /usr/bin/xauth
+
+# override default of no subsystems
+Subsystem sftp /usr/libexec/openssh/sftp-server
+

spec/fixtures/sshd_config_solaris

@@ -0,0 +1,128 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Port 22
+#Protocol 2,1
+Protocol 2
+#AddressFamily any
+AddressFamily any
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_rsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+ServerKeyBits 768
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTH
+#LogLevel INFO
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 120
+LoginGraceTime 120
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+PasswordAuthentication yes
+# Use PAM via keyboard interactive method for authentication.
+# Depending on the setup of pam.conf(4) this may allow tunneled clear text
+# passwords even when PasswordAuthentication is set to no. This is dependent
+# on what the individual modules request and is out of the control of sshd
+# or the protocol.
+PAMAuthenticationViaKBDInt yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+GSSAPIKeyExchange yes
+
+
+#AllowTcpForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+ClientAliveInterval 0
+ClientAliveCountMax 3
+#ShowPatchLevel no
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#MaxSessions 10
+
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+Banner none
+
+#XAuthLocation /usr/bin/xauth
+XAuthLocation /usr/openwin/bin/xauth
+
+# override default of no subsystems
+Subsystem sftp /usr/lib/ssh/sftp-server
+

spec/fixtures/sshd_config_suse_i386

@@ -0,0 +1,139 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Port 22
+#Protocol 2,1
+Protocol 2
+#AddressFamily any
+AddressFamily any
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_rsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+ServerKeyBits 1024
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTH
+#LogLevel INFO
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 120
+LoginGraceTime 120
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+#GSSAPICleanupCredentials yes
+GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication mechanism.
+# Depending on your PAM configuration, this may bypass the setting of
+# PasswordAuthentication, PermitEmptyPasswords, and
+# "PermitRootLogin without-password". If you just want the PAM account and
+# session checks to run without PAM authentication, then enable this but set
+# ChallengeResponseAuthentication=no
+#UsePAM no
+UsePAM yes
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+#AllowTcpForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+ClientAliveInterval 0
+ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS yes
+UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#MaxSessions 10
+
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+Banner none
+
+#XAuthLocation /usr/bin/xauth
+XAuthLocation /usr/bin/xauth
+
+# override default of no subsystems
+Subsystem sftp /usr/lib/ssh/sftp-server
+

spec/fixtures/sshd_config_suse_x86_64

@@ -0,0 +1,139 @@
+# This file is being maintained by Puppet.
+# DO NOT EDIT
+
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Port 22
+#Protocol 2,1
+Protocol 2
+#AddressFamily any
+AddressFamily any
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+HostKey /etc/ssh/ssh_host_rsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+ServerKeyBits 1024
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTH
+#LogLevel INFO
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 120
+LoginGraceTime 120
+#PermitRootLogin yes
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile .ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+#GSSAPICleanupCredentials yes
+GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication mechanism.
+# Depending on your PAM configuration, this may bypass the setting of
+# PasswordAuthentication, PermitEmptyPasswords, and
+# "PermitRootLogin without-password". If you just want the PAM account and
+# session checks to run without PAM authentication, then enable this but set
+# ChallengeResponseAuthentication=no
+#UsePAM no
+UsePAM yes
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+#AllowTcpForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+ClientAliveInterval 0
+ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS yes
+UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#MaxSessions 10
+
+#PermitTunnel no
+#ChrootDirectory none
+
+# no default banner path
+#Banner none
+Banner none
+
+#XAuthLocation /usr/bin/xauth
+XAuthLocation /usr/bin/xauth
+
+# override default of no subsystems
+Subsystem sftp /usr/lib64/ssh/sftp-server
+